LCH300 hydraulic luffing-jib crane

The LCH300/16t hydraulic luffing jib crane is available in various versions: embedded, supported on bases of 6 or 8 metres, or movable. The LCH300 crane can be assembled with 2.5 x 2.5m tower sections. Its modular jib has a reach of 25 to 60 metres, with configurations every 5 metres. It has a minimum working radius of 4 metres and a minimum radius of 9 metres when out of service.

This model has manual reeving changing from 1-fall (1F) to 2-fall (2F) and vice versa. The maximum load capacity of the LCH300 crane is 8t with the 1F configuration and 16t with the 2F configuration. The maximum load at the end of the jib is 7 500 lb in the 1F version (maximum length of jib 196,9 ft) and 9 260 lb in the 2F version (maximum length of the jib 180 ft) respectively.

From the cabin of the LCH300 luffing jib crane there is direct visibility of the lifting mechanism of between 50kW (standard) and 65kW (optional). The Effi-Plus technology means that the speed of the lifting mechanism can be increased without affecting consumption, which allows loading cycles to be considerably reduced, thereby optimising the crane´s productivity.

The luffing simultaneously moves the jib and counter jib by means of a hydraulic cylinder at the cathead and jib hinge assembly. The hydraulic pump unit is a single piece located on a movable platform.

The design of this new rotating crane -jib, cathead and counter jib- as well as the mechanism, cabin and hydraulic unit platforms, optimises the transportation of this model. The rotating part can be supplied in 7 lorries or containers.

The LCH300 hydraulic luffing jib crane incorporates the Cube Cab (L or XL) with Split-type air conditioning. As with the lifting platforms and hydraulic unit, the cabin platform can be transported in one piece.